*
*
*
*
*
CONNECTOR CORDS
Note: On all Connector Cords, state:
B (Black) or R (Red)
#309-1 Alligator Clip, both ends (insulated),
12"
#309-2 Alligator Clip, both ends (insulated),
18"
#309-3 Alligator Clip, both ends (insulated),
24"
#309-4 Alligator Clip, both ends (insulated),
36"
#199-19 Alligator Clip/Banana Plug, Stacking/Cross
Patch 12"
#199-21 Alligator Clip/Banana Plug, Stacking/Cross
Patch 24"
#199-22 Alligator Clip/Banana Plug, Stacking/Cross
Patch 36"
#199-13 Banana Plug, both ends, Stacking/Cross
Patch 12"
#199-15 Banana Plug, both ends, Stacking/Cross
Patch 24"
#199-16 Banana Plug, both ends, Stacking/Cross
Patch 36"
#1860-1 Spade Terminals, both ends, 12"
#1860-2 Spade Terminals, both ends, 18"
#1860-3 Spade Terminals, both ends, 24"
CONNECTORS ONLY
#309-A Alligator Clip, pk/10
#309-B1 Insulator for Alligator Clip, Black,
pk/10
#309-B2 Insulator for Alligator Clip, Red, pk/10
#309-C Banana Plug, Cross Patch/Stacking
#309-D Crocodile Clip, pk/10
#309-E Spade Terminals, pk/10
#310 Conductivity of Solutions, (Conductivity Tester).
For showing the electrical properties of liquids. Consists of
a molded socket on a PVC cover, provided with binding posts for connection
of two wire cords. Two electrodes are internally connected to the
lamp circuit. The cover is designed to fit a clear glass tumbler.
Light bulb, glass tumbler, and instructions sheets are provided.
#315 Conductivity Of Solutions with Plastic Jar
The unit the same as the #310, only provided with a plastic tumbler.
#319 Contact Key, Single.
For experiments which require momentary current. Key mounted
on a 3"" x 4-1/2"" black acrylic base, with two binding posts. The
dey is made of plated metal with contacts and insulated button which is
pressed to close the circuit momentarily.
#1851 Current Balance.
This unit is used to measure the current traveling
through a conductor. Instructions provided.
ELECTRODES
*(Are stamped with the element symbol, .030
to .040 thickness---3/4" x 5")
#501-2 Electrodes, Platinum
#501-3 Electrodes, Copper
#501-4 Electrodes, Carbon
#504-1 Electrodes, Flat Aluminum
#504-2 Electrodes, Flat Brass
#504-4 Electrodes, Flat Copper
#504-5 Electrodes, Flat Iron
#504-7 Electrodes, Flat Zinc
#504-8 Electrodes, Flat Nickel
#504-9 Electrodes, Flat Tin
#504-3 Electrodes, Flat Carbon. .1875 thickness
3/4" x 5"
#504-10 Electrodes, Stainless Steel.
The electrodes are constructed of stainless steel
with a plastic shrink tubing covering the rods up to the binding area.
#505-1 Electrodes, Pencil Type, Carbon. . .1/4"
x 5"
#499-EL Electrodes, Platinum, Replacements for
the Brownlee Apparatus
ELECTROLYSIS APPARATUSES
#498 Electrolysis Apparatus, Brownlee, with Jar.
This unit consists of an acid-proof, non-porous
insulating supports with a spring clip for holding test tubes, binding
posts and two platinum electrodes. The supports fit a 4 1/2 x 5""
battery jar and holds 150mm x 18mm test tube. Platinum electrodes
and instructions are included.
#499 Electrolysis Apparatus, Brownlee, without
Jar
#499-1 Electrolysis Jar, Molded Glass 4-1/2"
D. x 5" H.
#499-2 Electrolysis Apparatus, Brownlee, New Design.
This unit features several improvements over
the standard Brownlee. The open front spring clips make it much easier
to remove the test tubes while the tubes remain submerged. The test
tubes have been graduated for a clear measurement of the volume of gas
generated. The black acrylic background aids in viewing the water
level while supporting the test tubes. The binding posts have been
reposititioned for easy access and greater safety. The unit measures
140mm x 203mm x 38mm. Instructions included.
#500 Electrolysis, Hoffman.
Graduated arms 19" in length with stopcocks at
the top make it possible for both qualitative and quantitive measurement
of the effect of electric current on liquid. Supplied with Support
Stand, Burette Clamp, Platinum Electrodes and Instructions. Graduated
to 50ml in 0.2ml subdivisions. Overall height is about 32".
#500-1 Electrolysis Apparatus, glass parts only. ( Replacement glass for #500)
#501 Electrolysis Apparatus, Collecting Tubes
& Platinum Electrodes.
Designed for student experiments in electrolysis,
this durable, easy-to-use kit features two telescoping gas-collecting tubes
graduated to 10ml. Plus, high-quality platinum electrodes.
#501-1 Electrolysis Apparatus, with Ugraduated
Tubes
The two arms of the U-tube are ungraduated and
open at the top. Rubber tubes and pinch clamp are used at the open
ends to retain the gases.
#505-2 Electromagnet, Dissectible.
A U-shaped electromagnet having two removable
excitation coils and an armature with hook. Overall length approximately
13 cm. Terminals are mounted at the top of each coil.
#505-3 Large Iron Clad Electromagnet.
A strong enamel covered electromagnet powered
by four 1.5 volt C batteries. Equipped with alligator clip leads approximately
6"" in length. The unit measures 75mm diameter x 260mm length.
Batteries not included. Instructions provided.
#1823 Electronic Accessory Board.
This 10"" x 10"" clear acrylic board is great
for teaching simple electric circuits. The wires that connect red
and black binding post and banana jacks are color coded. This board
has a SPST knife switch, DPDT knife switch, push button switch and two
mini receptacles.
#1828 Electricity & Magnetism Kit.
This kit can be used to demonstrate most of the
principles of electricity. Supplied with an easily understood instruction
manual. The kit contains the following: Voltmeter 0-1.5; 0-3v,
Milliammeter 0-500 mA; 0-1000mA, Electroscope, Battery Kit, Mini Rheostat,
Two Bar Magnets 2"" in length, Compass Needle, Two Resistors, Mini Electromagnet,
Horseshoe Magnet, Two Mini Contact Switches, Two Bulb Holders, Package
of Iron Filings, Battery Holder D-Cell, Coil of Wire, Steel Rod Electromagnet,
Acrylic Piece 19mm x 120mm, Two Plastic Rods 5mm x 120mm.
ELECTRONIC DESIGN LINE MODULAR UNITS
The Electronic Design Line (EDL).
Modular units offer infinite possibilities into
the world of hands-on electrical experiments. Each unit can be used
independently or in conjunction with other units to create exciting, visual
demonstrations. Instructions are provided for each module, plus the
EDL Packs are supplied with special instruction booklets containing instructions
for collective experiments.
#1207-1 EDL Power Board.
The base of all the EDL units is electrical power.
You can supply your own or use this convenient D. C. power unit for supplying
3, 6 or 9 volt D.C. current.
#1207-2 EDL Lamp & Switch.
This is a SPST knife switch that opens and closed
the circuit of a 3 or 6 volt lamp.
#1207-3 EDL Motor & Reversible Switch.
This 3 volt D. C. motor can be used with many
mechanical-electrical experiments or used in conjunction with the reversible
switch. Thrown one way the motor will run clockwise and thrown the
other way the motor will run counter clockwise. The switch can also
be used independently in other experiments.
#1207-4 EDL Heat & Magnetic Switch.
The thermostat on this unit can be used to either
open or close a circuit by heat. The magnetic switch has normally
open contacts that close when a magnet is brought near.
#1207-5 EDL Transformer.
This mounted transformer is designed to demonstrate
how voltage can be either stepped up or down. Input voltage must
be either A.C. or pulsating D.C. current. You can use your own power
supply or try the EDL Electromagnetic Solenoid and Pulsator.
#1207-6 EDL Electromagnetic Solenoid & Pulsator.
Illustrate electromagnetism and polarity.
Connect the spring arm and contacts for constructing a working relay or
use this item to pulsate D.C. current so that it can be used in an A.C.
transformer such as the EDL Transformer.
#1207-7 EDL Resistance Set.
Use an ohm meter to demonstrate the difference
in resistance or to teach the standard color code of resistors. Hook
up the potentiometer for a variable resistance ranging from 0 to 150,000
ohms. This unit can also be incorporated into many of your own experiments
as well as used in several EDL experiments such as a solar alarm using
the EDL Buzzer and Contact Switch and EDL Solar Cell.
#1207-8 EDL Buzzer & Contact Switch.
This unit can be used for many experiments requiring
a 6 volt buzzer or a momentary closed switch. By supplying power,
you can hook the key switch to the buzzer to create a sounding device for
practicing Morse code. You can also connect two units together to
send Morse code to each other.
#1207-9 EDL Connector Wires. Pk of 12.
These insulated wires with stripped ends are
perfect for all EDL experiments. Wires are 18 gauge solid copper, 12" long.
#1207-10 EDL Explorer Pack.
Contains 1 each of : Power Board, Solar
Cell, Motor and Reversible Switch, Buzzer and Contact Switch, and Resistance
Set. This unit also contains 1 pkg. Of EDL Connector Wires and Instruction
Booklet for the following: Solar Driven Motor, a Solar Alarm, Morse
Code Transmitter, Light Dimmer, Reversible Motor and more.
#1207-11 EDL Designer Pack.
Contains 1 each of: Power Board, Lamp and
Switch, Transformer, Electronic Solenoid and Pulsator, Heat and Magnetic
Switch plus 12 connector wires. Some of the experiments explained
in the instruction booklet are: stepping up voltage using a transformer,
thermostat controlled light, electronic locks, electromagnets, and a working
relay.
#1207-12 EDL Engineering Pack.
Contains both the #1207-10 and the #1207-11 plus
an advance work booklet.
#1207-13 EDL Solar Cell.
This solar cell can be used independently to
create .5 volt 300 mA or with other solar cells to produce greater voltage.
This solar cell will run the motor on the EDL Motor and Reversible Switch.
You could use it in conjunction with the EDL Buzzer and Contact Switch
and the EDL Resistance Set to Build a Solar Alarm.
#1207-14 EDL Demonstration Fuse.
Simple and visual. This EDL consists of two clips
in which a piece of steel wool is stretched. When excess voltage
is applied to the fahnstock clips the steel wool instantly burns, which
opens the circuit. The distance between the clips can be varied as
well as the number of strands of steel wool, thus changing the fuses voltage
rating.
#1207-15 EDL Galvanometer
Many test circuits need some sort of visual indicator.
This meter is built from a high quality, liquid dampening compass.
This gives you a smooth, steady, reading that is easy to compare.
Quick connections are made via fahnstock clips.
#1207-16 EDL Multi-Push Button Switch.
Five normally open push button switches are mounted
on the EDL module board. Several projects can be controlled at the
same time with this one unit. Each switch has its own fahnstock connectors.
In addition, a conductor pin is provided to be used as a common ground
for all switches, if needed.
#1207-17 EDL Digit Display.
Bring a little high tech to your project with
this large LED number display. Capable of displaying numerals 0 to
9 using only two volts DC. Each leg of the display has its own fahnstock
clips for quick and easy connection.
#410 Electric Bell Apparatus.
A complete electric bell kit for electric wiring
projects and other electrical experiments. Includes an electric bell,
push button switch, wire, electrical tape, staples and a 6 volt battery.
An instruction sheet is provided.
KNIFE SWITCHES w/Plastic Base
Each knife switch has mounted screw binding post for electrical connections.
#912 Single Pole, Single Throw
#913 Single Pole, Double Throw
#914 Double Pole, Single Throw
#915 Double Pole, Double Throw
LAMP BOARDS
#1200 Three Lamp Series.
Three miniature receptacles are mounted on a clear acrylic base.
Each receptacle is connected to two fan-stock-clips. This unit can
be used to demonstrate parallel and series wiring. Instructions are
provided.
#1200-1 Three Lamp, Economy
#1200-2 Single Lamp Board.
Mini lamp socket receptacle mounted on a clear acrylic base with two
binding posts for connecting wires. Instructions provided.
#1200-3 Five Lamp Parallel & Series Circuits.
Demonstrates parallel and series circuits using this easily convertible
lamp board, five mini receptacles are mounted to a clear acrylic base.
Buss bars connecting the receptacles allow for quick changing from parallel
to series and many combinations of the two. Size 15"" x 5"".
Instructions are included.
#1200-14 Economy, Five Lamp, Parallel & Series Circuits
#1200-4 Bulb Only. Size: 3.7 volt DC 150 mA. Fits all lamp boards.
#1200-5 Lamp Board, Mini with Switch.
A mini receptacle and single knife switch are wired in series and mounted
on a 3"" x 4-3/4"" black acrylic base. Ideal for use with various
electrical experiments. Lamp and instruction sheet provided.
#1200-6 Four Lamps Board.
Four lamps are mounted on a clear acrylic base and is used to show
parallel circuits. This unit uses a safe 3 volt DC power supply.
Instructions provided.
LAMP RECEPTACLES
#1200-10 Receptacle, Mini Plastic with screw type binding post.
#1200-11 Socket with two Metal Terminals
#1200-12 Receptacle, Mini Porcelain with screw type binding post.
1200-13 Receptacle, Plastic Disc.
For basic electricity studies. Supplied with fahnstock clips
for easy connection.
LAMP, TABLE TOP
#1200-15 Lamp, Table Top, Gooseneck - 12" overall height, Accepts 60
Watt Bulb
#1253 Magneto Generator.
The field of this magneto consists of a single Alnico magnet which
has a strong magnetic flux density. Capable of producing higher voltages
then cobalt-steel magnets. Although field intensity cannot be changed,
magneto produces an equivalent of greater current than cobalt-steel types.
Generator is mounted on 7 5/8"" x 12"" wood base with incandescent lamp
and socket used as a load. Two binding posts are placed on the board
for attaching other loads. Complete with instructions.
METERS
Student Grade (+ or - 2.5% Accuracy)
mA-millimeter uA-micrometer
#1309-1 AC/DC Ammeter. . .Black. .0-3A
#1309-2 DC Ammeter. . .Red. . .-20-0-100uA
#1309-3 DC Ammeter. . .Red. . .0-500uA
#1309-4 DC Ammeter. . .Red. . .0-1mA
#1309-5 DC Ammeter. . .Red. . .0-100mA
#1309-6 DC Ammeter. . .Red. . .0-200mA
#1309-7 DC Ammeter. . .Red. . .0-500mA
#1309-8 DC Ammeter. . .Red. . .0-1A
#1309-9 DC Ammeter. . .Red. . .0-3A
#1309-10 DC Ammeter. . .Red. . .0-5A
#1309-11 DC Ammeter. . .Red. . .0-10A
#1309-12 DC Ammeter. . .Red. . .0-1A, 0-5A
#1309-13 DC Ammeter. . .Red. . .0-50mA, 0-500mA, 0-5A
#1309-14 DC Voltmeter. . .Blue. . .0-3V
#1309-15 DC Voltmeter. . .Blue. . .0-5V
#1309-16 DC Voltmeter. . .Blue. . .0-10V
#1309-17 DC Voltmeter. . .Blue. . .0-5V, 0-15V
#1309-18 DC Voltmeter. . .Blue. . .0-3V, 0-10V, 0-15V
#1309-19 DC Voltmeter. . .Blue. . .0-3V, 0-15V, 0-300V
#1309-20 Galvanometer. . .White. . .-500-0-500uA
#1309-21 Galvanometer. . .White. . .-35-0-35mV
#1309-22 Galvanometer. . .White. . .-500-0-500mA DC
#1306-41 Digital Multi-Meter.
Almost all electrical experiments require the accurate measurement
of voltage, current or resistance. This digital meter is housed in
a strong, resilient plastic case with a .5" tall display and is highly
accurate. Comes with attachment cords and uses 9 volt battery.
Ranges are DC-20 mV, 2000mV, 20V, 200V, 1000V AC-200V, 750V, DC Current-200uA,
2000uA, 200mA.
Meters, Electric, for Overhead Projectors
These fully functional electric meters are built in transparent cases
so that they can easily be projected for classroom education. Each
unit incorporates dampening features, magnetic shielding and an accuracy
of + or - 2.5%. 4"x4.5" 4.3oz
#1309-30 Voltmeter -0.5v-0-2.5v, -2v-0-10v,
#1309-31 Ammeter -100mA,-0-500mA, -500mA-0-2.5A
#1309-32 Galvanometer -300uA-0-300uA
#1848 Motor Demonstration, with Three Armatures.
This heavy duty motor is a wonderful visual aid for demonstrating the
functions of DC electric motors. Built from cast steel, this unit
runs freely and quietly on 2 to 4 volts DC. The motor is mounted
on a wooden base and stands approximately 5 1/2"" high. Connections
are made through the insulated binding post.
#1847 Miniature Motor Model.
This model of both an AC and DC motor is quick to put together and
easy to assemble and disassemble. This unit is self-contained and
even includes the wrench and screw driver needed. Demonstrate both
permanent and electromagnet motors. Everything comes packed in it's
own protective case which becomes the base for the motor when it's assembled.
Instructions included.
#1849-M Motor, DC Low Voltage, with Leads
# 280-A DC Motor with Leads
This little yet powerful motor is ideal for hundreds of electrical
experiments and projects. The motor housing is 23.8 mm in diameter
and 30.5 mm in length with an overall length of 45mm including the 2mm
diameter shaft. Voltage requirements are 4.5 to 6.0 dc volts. Each
unit also incorporates a 30mm long red and black connector cord with insulators.
Weight is 50 grams.
#1850 AC/DC Generator.
With this unit both alternating & direct current can be demonstrated.
By turning the handle the current that is produced can be seen as it lights
the lamp. The quicker the handle is turned, the brighter the light.
Instructions included.
#1852 The One Handed Generator.
This simple generator can be operated with one hand, and will generate
up to ten volts. Moderate cranking speeds will generate approximately
5.5 volts D.C.. The alligator clips on the end of the connection
cords provide a convenient hook up to any electrical device. The
units transparent casing also allows for viewing of the inside workings
of the generator during operation.
#1853 DC Generator
This pistol grip style handle generator can be utilized with almost
any experiment requiring up to 12 volt DC current. Housed in tough
clear plastic. This unit is not only funtional but cost about half
of that of similar models. This generator can also be used as a hand
generated flashlight due to the mounted lamp on the end or use the binding
post to connect an outside electrical circuit.
#1857 St. Louis Motor
The St. Louis Motor is useful in demonstrating the operations of a
DC motor. The motor consists of a 2 pole armature mounted between
magnets. The steel supports are mounted on a ridged plastic base.
Will operate on 3 to 9 volts DC. Instructions provided.
#1858 DC Motor Kit
This kit allows students to build their own DC motor from scratch.
All of the needed parts are included along with a detailed instructions
manual. The unit is 7.5"" x 9"" x 5"" after assembled and runs on
one AA battery.
#1440 Primary & Secondary Coil.
Used to study electromagnetic induction & transformer principles.
The outer coil is 4 1/2"" tall and 2 3/4"" in diameter. The inner
coil is 3 3/4"" tall and 1 1/4"" in diameter. The removable steel
core with handle is 1/2"" in diameter and 5 1/2"" tall. All coils
are wrapped with 20 gauge magnet wire with insulated binding posts as connectors.
RESISTANCE APPARATUS
#1800-4 Resistance Board.
Made of 1/8"" Clear Acrylic with 20 mounted resistors. The Resistor
Board sets both vertically and horizontally for ease of use. The
board is made of 1/8"" acrylic for over head projection use. The
resistors, 20 in all, are spaced slightly above the board for cooling purposes.
Each resistor is also equipped with both a black and red thumb nut for
easy connections. The unit contains the following resistors: two
10 ohm 5 watt power wire wound, two 100 ohm 1/2 watt, four 10 meg. ohm
1/2 watt, one 1K ohm 1/2 watt, one 1 meg, ohm 1/2 watt, one aluminum housed
50 ohm 10 watt, one aluminum housed 100 ohm 10 watt, two 560 ohm 1/2 watt,
two 2.4K ohm 1/2 watt, one 10 ohm 1/2 watt, one 51K ohm 1/2 watt.
#1800-5 Resistors, Mounted.
Variable resistor values. Securely mounted for class use.
These six wire-wound resistors ranging form 5 to 1000 ohm are mounted on
a 10 x 15 cm base and are rated at 5 watts. Connecting nuts attached
to the ends of each resistor make connections easy. The resistors value
is hidden from view. The students try to asses the value of the resistance.
Useful when coupled with a Wheatstone Bridge.
#1800-2 Resistance Box, 3 Switch.
A multi-resistor box with resistance ranging form 0 to 999 ohm.
Coils calibrated to accuracy of 0.2%. Coils have noninductive windings
so box is acceptable in both DC and AC experiments. All coils firmly
locked into place to eliminate physical strain on wires. Box is black
plastic. Measures 5 1/2" x 7" x 2 1/2". Other features; silk-screened
cover, insulated binding posts, pointer knobs, and multiple switches with
wiping contacts. Instructions provided.
#1880-3 Resistance Box, 2 Switch.
Same as #1800-2 except values range from 0 to 99.
RHEOSTATS
Inexpensive wire-wound variable resistances of various power ratings
housed in ventilated black plastic cases which protect windings.
Resistance and power values are marked on the case. Features three
insulated binding posts so that students may use it as a potentiometer
or rheostat.
#1810-A Rheostat, Potentiometer. . .25 Ohms. . .25 Watts
#1810-B Rheostat, Potentiometer. . .10 Ohms. . .25 Watts
#1810-C Rheostat, Potentiometer. . .500 Ohms. . .50 Watts
#1810-D Rheostat, Potentiometer. . .35 Ohms. . .50 Watts.
These variable resistance apparatuses are functional for experiments
requiring varying degrees of electrical resistance and are great for demonstrating
the properties of resistance being proportional to wire length. Each
is mounted on an air core insulated ceramic tube with sliding contacts
and connections at both ends.
#1820-A Rheostat, Slide Wire. . .5.0 Ohms. . .3.0 Amps
#1820-B Rheostat, Slide Wire. . .10 Ohms. . .2.0 Amps
#1820-C Rheostat, Slide Wire. . .20 Ohms. . .2.0 Amps
#1820-D Rheostat, Slide Wire. . .50 Ohms. . .2.0 Amps
#1820-E Rheostat, Slide Wire. . .50 Ohms. . .1.5 Amps
#1820-F Rheostat, Slide Wire. . .200 Ohms. . .1.25 Amps
#1820-G Rheostat, Slide Wire. . .2000 Ohms. . .0.3 Amps
SOLAR CELL
#1849 Solar Cell and Motor Demonstration.
High-power silicon cell converts light directly into electricity to
operate a motor. Exceptionally high output 1/2v with 300 milliamps
of current output in bright sunlight. Solar cell approximately 2"
x 3" with plastic diffusing lens and protective mounting. Motor with
special anti-friction bearings revolves approximately 400 RPM in bright
sunlight. Instructions included.
#1849-1 Solar Cells, Silicon 3 Cells Mounted on
an Acrylic Base.
Three solar cells 1 3/4" x 3", mounted on a 4" x 6" black acrylic base,
with three sets of binding posts. Useful as a power source for many
electical experiments.
#1849-2 Solar Cells, Demonstration.
This is a great desk top item and attention getter. Four powerful
solar cells are mounted on a revolving disk and motor. This in turn
is mounted to a plastic stand and base. Watch as the entire disk,
solar cells included, begin to whirl around when the unit is placed in
the sun. Instructions provided.
SOLENOID
#1850-1 Solenoid/Electromagnet with Core.
Used for many demonstrations involving electric magnets or solenoid.
A plastic spool is wrapped with three layers of 20 gauge magnet wire.
Insulated binding posts are located at each end for connection. Included
is a 3/4" x 6" steel core. Instruction sheet provided.
#1824 Solenoid, with Mount.
A pre-wound solenoid and steel core with a back mounting block.
The 3/4"" core has a threaded hook for attaching a spring or a cord.
This can be used for creating mechanical movement or demonstrating the
increase of magnetism in relationship to power. Mounting block accepts
up to 1/2"" rod.
#2007 Thermostat Model.
The thermostat unit demonstrates the control of temperature or electric
currents by deferential expansion of metals. The bimetallic strip
mounted on a cast iron base can be used to open or close an electric circuit
with varying changes in temperature. Instructions provided.
#2010 Transformation of Energy Apparatus.
Demonstrates the transformation of mechanical energy into electrical
energy, light, heat and sound energy. Mechanical energy is induced
into this unit through a high quality Alnico magnet generator. Through
the use of knife switches, the current can be directed to an electric bell,
lamp and socket, 110V induction motor with propeller, or any combination
of the three. Feel the difference in the drag of the generator as
the switches are opened and closed. The entire unit is mounted on
a stained and varnished wood base. Complete with instruction sheet.
#409 Dissectible Transformer.
This unit encompasses both a U-Core and an I-Core. The transformer
plates are made from grain oriented steel. The recommended power
source is a maximum of 12 volts, 3 amps. Included are 2 coils, 1-100
turns, 1-200 turns and an instruction manual.
VOLTAIC CELL
#1822 Standard Voltaic Cell
The voltaic cell is ideal for demonstrating the characteristics of
a primary cell. The cells cup is clear so you can easily view the
electro-chemical reactions taking place. The top rim is made of heavy
molded plastic with sturdy nickel plated clamps designed to hold both round
and flat electrodes. A porous cup is also included. The unit
measures 95mm diameter x 120mm height. Instructions provided.
#1826 Voltaic Cell, with 8 Electrodes & Porous
Cup.
Supplied with 8 electrodes, one each flat aluminum, copper, brass,
iron, zinc, nickel, tin and one round carbon electrode.
#1822 Voltaic Cell, 2 electrodes.
Supplied with 2 electrodes, copper and zinc.
#2305 Wheatstone Bridge
#2305-1 Wheatstone Bridge Experimental Set.
A complete set with all the necessary equipment to study design and
the used of the Sidewire Wheatstone Bridge. This unit is mounted
on a sturdy aluminum channel base. Included are: One each -
6 volt battery, a galvanometer, 0-999 ohm Resistance Box, Connector Cords,
six Mounted Resistors and Contact Key. Instruction sheet provided.
#2305 Wheatstone Bridge (New Style)
Teachers exploring the world of electricity and electrical circuits
will not find a more ruggedly built and handsome Wheatstone Bridge than
this. Nickel plated metal strip and a light hardwood meter stick
is mounted to a beatifully stained hardwood base. Metal binding post
complete the solid demonstration apparatus. Complete with instructions.
1.5" x 4.5" x 44.5 (5 lbs)